Asus M2V-X - Manual (Page 60)

4-4 Chapter 4: BIOS Setup
3. The utility will copy the current system BIOS by default to the floppy
disk. Make sure that the floppy disk has at least 600KB of free disk
space and is not write-protected.
4.1.4 Using ASUS EZ Flash 2 to update the BIOS
The ASUS EZ Flash 2 feature allows you to update the BIOS without
having to go through the long process of booting from a floppy disk and
using a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip
so it is accessible by pressing + during the Power-On Self-
Test (POST).
To update the BIOS using ASUS EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file
for the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3. You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to
the floppy disk drive or the USB port.
Press + during POST to display the following.
A:\>afudos /oMYBIOS03.rom
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading flash ..... done
A:\>
When the copy process is complete, the utility returns to the DOS
prompt.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.00
Current ROM Update ROM
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
FLASH TYPE: SST 49LF008 FWH
PATH: A:\
BOARD: M2V-X
VER: 0024 [0101]
DATE: 03/09/07
BOARD: Unknown
VER: Unknown
DATE: Unknown