Asus M2V-X - Manual (Page 113)

ASUS M2V-X 5-17
Delete Array
1. From the VIA RAID BIOS utility main menu, select Delete Array then
press .
3. Press to confirm or to return to the configuration options.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
10. Press to confirm or to return to the configuration options.
11. Press to go back to main menu.
Select Boot Array
1. From the VIA RAID BIOS utility main menu, select Select Boot Array
then press .
2. From the list of channel used for IDE RAID arrays, press to
select a RAID array for boot. After selection, the Status of the selected
array will change to Boot.
3. Press to return to the menu items. Follow the same procedure
to deselect the the boot array.
2. From the list of channel used for IDE RAID arrays, press to
select a RAID array to delete. The following confirmation message
appears.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
VIA Tech. RAID BIOS Ver 1.xx
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/Disk Status
↑,↓ : Move to next item
Enter : Confirm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
[ ]Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
[ ]Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX