Asus M4A88TD-M - Manual (Page 65)

ASUS M4A88TD-M 2-21
UMA Frame Buffer Size [Auto]
This item appears only when you set the Internal Graphics Mode item to [UMA].
Configuration options: [Auto] [32MB] [64MB] [128MB] [256MB] [512MB] [1024MB]
• The [512MB] option only appears when you install 1GB or higher capacity DIMMs.
• The [1024MB] option only appears when you install 2GB or higher capacity DIMMs.
Surround View [Auto]
If you set the PCI Express device as the primary display and enable this item, you may use
the internal graphics as the secondary display. This item appears only when you set the
Internal Graphics Mode item to [UMA]. Configuration options: [Auto] [Enabled] [Disabled]
When set to [Auto], only the primary display could be activated.
Frame Buffer Location [Above 4G]
Allows you to select the FB Location. Configuration options: [Below 4G] [Above 4G]
AMD HDMI Audio [Enabled]
Allows you to disable or enable the AMD 880 HD Audio.
Configuration options: [Disabled] [Enabled]
2.5.3 Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Selects the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4]
[2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Selects the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Selects the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP] [EPP + ECP]
ECC Configuration
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and correct
memory errors automatically. Configuration options: [Disabled] [Basic] [Good] [Super]
[Max] [User]
Internal Graphics
Primary Video Controller [GFX0-GPP-IGFX-PCI]
Allows you to set the primary display adapter. Configuration options: [GFX0-GPP-IGFX-PCI]
[GPP-GFX0-IGFX-PCI] [PCI-GFX0-GPP-IGFX] [IGFX-GFX0-GPP-PCI]
Internal Graphics Mode [UMA]
Selects the internal graphics mode. Configuration options: [Disabled] [UMA]