Asus M4A88TD-M - Manual (Page 55)

ASUS M4A88TD-M 2-11
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA mode
disabled. Configuration options: [Disabled] [Auto]
Block (Multi-Sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When this item is set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device supports multi-
sector transfer feature. When this item is set to [Disabled], the data transfer from and to the
device occurs one sector at a time. Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]
2.3.4 SATA Configuration
The SATA Configuration menu allows you to configure your storage devices. Select an item
then press to display the submenu.
OnChip SATA Speed [Auto]
[Auto] Allows automatic selection of the SATA speed.
[SATA 3.0Gb/s] Set the SB850 SATA speed to [SATA 3.0Gb/s] to support SATA 3.0Gb/s
HDDs with max. speed at 3.0Gb/s.
[SATA 6.0Gb/s] Set the SB850 SATA speed to [SATA 6.0Gb/s] to support SATA 6.0Gb/s
HDDs with max. speed at 6.0Gb/s.
OnChip SATA Channel [Enabled]
Enables or disables onboard channel SATA port. Configuration options: [Disabled] [Enabled]