Asus P5E Deluxe - Manual (Page 86)

4-20 Chapter 4: BIOS setup
VCORE Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 1.10000V to
1.70000V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with
a 0.02V interval.
FSB Termination Voltage [Auto]
Allows you to set the Front Side Bus termination voltage. The values range from
1.20V to 1.50V with a 0.02V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.80V to 2.66V with a
0.02V interval.
North Bridge Voltage [Auto]
Allows you to set the North Bridge voltage. The values range from 1.25V to 1.75V
with a 0.02V interval.
• Setting CPU PLL Voltage, FSB Termination Voltage, DRAM Voltage, and
North Bridge Voltage to a high level may damage the chipset, memory
module, and CPU permanently. Proceed with caution.
• Values of the CPU PLL Voltage, FSB Termination Voltage, DRAM Voltage
and North Bridge Voltage are labeled in different colors to indicate the risk
of high voltage settings. Refer to the table below for details.
• The system may need better cooling system to work stably under high
voltage settings.
Blue Yellow Purple Red
CPU PLL Voltage 1.50V–1.78V 1.80V–2.00V 2.02V–2.20V 2.22V–2.78V
FSB Termination Voltage 1.20V–1.38V 1.40V–1.50V N/A N/A
DRAM Voltage 1.80V–1.98V 2.00V–2.20V 2.22V–2.40V 2.42V–2.66V
North Bridge Voltage N/A 1.25V–1.41V 1.43V–1.55V 1.57V–1.75V