Asus P5E Deluxe - Manual (Page 85)

ASUS P5E Deluxe 4-19
Sec. Information : 8-3-5-4-6-4-6 (These values are auto-detected)
Read to Write Delay (S/D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Write to Read Delay (S) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Write to Read Delay (D) [Auto] Delay (D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Read to Read Delay (S) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Read to Read Delay (D) [Auto] Delay (D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Write to Write Delay (S) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
Write to Write Delay (D) [Auto] Delay (D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [2 DRAM Clocks]–[15 DRAM Clocks] [15 DRAM Clocks]
DRAM Static Read Control [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
Ai Clock Twister [Auto]
Allows you to configure the DRAM performance. Setting this item to [Light]
enhances the DRAM compatibility. Setting this item to [Strong] enhances the
DRAM performance. Configuration options: [Auto] [Moderate] [Light] [Strong]
Transaction Booster [Auto]
Configuration options: [Auto] [Disabled] [Enabled] [Disabled] [Enabled]
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value. The values
range from 1 to 31.
Pull-In of CHA/B PH1/2/3/4/5 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,
Phase 1 to 5. The number of phases is determined by DRAM frequency and
FSB strap. Configuration options: [Disabled] [Enabled]
The following six items are adjusted by typing the desired values using the
numeric keypad and press the key. You can also use the <+> and <->
keys to adjust the value. To restore the default settings, type [auto] using the
keyboard and press the key.