Asus Maximus IV GENE-Z - Manual (Page 97)

ROG Maximus IV GENE-Z 3-9
Long Duration Maintained [Auto]
Use the <+> and <-> keys to adjust the value.
Short Duration Power Limit [Auto]
Use the <+> and <-> keys to adjust the value.
Additional Turbo Voltage [Auto]
Use the <+> and <-> keys to adjust the value.
CPU Core Current Limit [1023.875]
Use the <+> and <-> keys to adjust the value.
CPU I/O Current Limit [Auto]
Use the <+> and <-> keys to adjust the value.
Digi+ VRM/POWER Control
The sub-items in this menu allow you to set the Digi+ VRM settings and Power
control.
VCore PWM mode [T.Probe]
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.
Vcore MOS volt. Control [Auto]
Use the <+> and <-> keys to adjust the value.
Configuration options: [Auto] [6V] [6.5V] [7V] [7.5V] [8V] [8.5V] [9V] [9.5V]
[10V] [10.5V]
VCore Load-Line Calibration [Auto]
Load-line is defined by Intel VRM spec and affects CPU voltage. The CPU
working voltage will decrease proportionally to CPU loading. Higher load-line
calibration would get higher voltage and better overclocking performance,
but increase the CPU and VRM thermal. You can adjust the voltage range
from 0% to 100% to boost the system performance from the Regular(0%),
Medium(25%), High(50%), Ultra(75%) and Extreme(100%) modes.
Configuration options: [Auto] [0%] [25% (Suitable for 3.6G-4.2G)] [High]
[50% (Suitable for 4.2G-4.8G)] [75% (Suitable for 4.8G-5.2G)]
[100% (Suitable for 5.2G-6.0G)]
The actual performance boost may vary depending on your CPU specification.
VCore Switching Freq [Auto]
Switching frequency will affect the VRM transient response and component
thermal. Setting a higher frequency gets faster transient response.
[Auto]
Allows you to enable or disable the Spread Spectrum item.
[Manual] Allows you to manually set the frequency with a 10KHz interval.