Asus Maximus IV GENE-Z - Manual (Page 92)

3-4 Chapter 3: BIOS setup
3.2.2 EZ Mode
The EZ Mode provides you an overview of the basic system information, and
allows you to select the display language, system performance mode and boot
device priority. To access the Advanced Mode, click Exit/Advanced Mode, then
select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer
to the Setup Mode item in section section 3.7 Boot memu for details.
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Selects the display language
of the BIOS setup program
Displays the CPU/motherboard
temperature, CPU/5V/3.3V/12V voltage
output, CPU/chassis/power fan speed
Power Saving mode
Normal mode ASUS Optimal
mode
Loads optimized default Selects the boot device priority
• The boot device options vary depending on the devices you installed to the
system.
• The Boot Menu(F8) button is available only when the boot device is
installed to the system.
Displays the system properties of
the selected mode on the right hand
side
Clicks to display all fan
speeds if available