Asus DSBF-D16/SAS - Manual (Page 96)

4-22 Chapter 4: BIOS setup
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Select ‘Yes’ if you
want to clear the
Extended System
Configuration
Data (ESCD) area.
PCI Configuration
Reset Configuration Data: [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCIE1 Slot
PCIE2 Slot
PCIE3 Slot
PCIX4 Slot
PhoenixBIOS Setup Utility
Advanced
4.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press
to display the configuration options.
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data (ESCD)
area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
PCIE1-3 Slot; PCIX 4 Slot
Allows you to configure the specific PCI devices.
Item Specific Help
Initialize device
expansion ROM
PCIE1 Slot
Optional ROM Scan: [Enabled]
PhoenixBIOS Setup Utility
Advanced
Optional ROM Scan: [Enabled]
Allows you to enable or disable the device expansion ROM.
Configuration options: [Enabled] [Disabled]