Asus DSBF-D16/SAS - Manual (Page 148)

5-34 Chapter 5: RAID configuration
5.3.3 Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
and cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume1
RAID10(RAID0+1)
Select Disks
128KB
0.0 GB
Create Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
2. Enter a name for the RAID 10 set, then press .
3. Highlight RAID Level, press the up/down arrow key to select RAID 10
(RAID0+1), then press .
4. Follow steps 4 to 9 of section 5.3.1 Creating a RAID 0 set (striped) to create
the RAID 10 set.