Asus DSBF-D16/SAS - Manual (Page 61)

ASUS DSBF-D16 Series 2-39
5. SAS connectors (DSBF-D16/SAS model only)
This motherboard comes with two Serial Attached SCSI (SAS) connectors,
the next-generation storage technology that supports both Series SCSI and
Serial ATA (SATA). Each connector supports one device.
®
DSBF-D16 Series SAS connectors
6. LPC debug card connector (14-1 pin LPC1)
This is a low pin count interface used to plug in the LPC debug card.
®
DSBF-D16 Series LPC debug card connector
LPC1
+3.3V
PIN1
+3.3V
+3.3V
GND
GND
LPC_LAD2
LPC_LAD3
LPC_LAD0
LPC_LAD1
PL
TRST
LFRAME_N
CLK
GND
To connect the SAS cable:
Plug in the SAS cable to the SAS
connector until the cable lock snaps
in place.
1
2
To disconnect the SAS cable:
1. With your thumb, push down the
cable lock to release.
2. While still keeping your
thumb’s grip on the cable lock,
carefully pull away the cable from
the connector.