Asus WiFi-b - Manual (Page 21)

Chapter 3: Software installation 3-3
3.2 Setup Wizard
After configuring the wireless option, the
Setup Wizard window appears. Click
Next.
3.2.1 Selecting the WiFi-b™ operation mode
The default setting of the WiFi-b™ card is Station Mode in an Infrastructure type
network. The first time you run the setup wizard, it scans available wireless
networks in your location and automatically selects the network with the best
signal. The wizard also allows you to connect to any of the available networks.
If you want to set your WiFi-b™ in soft access point mode or in Ad Hoc network
setting, check My Configuration, then click Next. See section 3.2.3 “My
Configuration” for details.
3.2.2 Station Mode
Follow these instructions to set your WiFi-b™ in station (STA) mode.
Select a wireless network from the table,
then click Next. WiFi-b™ connects to the
selected network.
Click the Search Again button ro rescan available access points in your location.
The appearance of setup wizard windows varies on different operating systems.