Asus WL-700gE - Manual (Page 49)

WL-700gE Wireless Router User Manual
49
1. Enable Security Mode? -Select Yes to enable security function on the data and
time you set below.
Date to Enable Security
Mode -
This field defines the date
that Security Mode is
enabled.
Time to Enable Security
Mode - This field defines
the time interval that
Security Mode is enabled.
Send to - Input the E-mail address you wish WL-700gE send the image to.
Email Server - This field indicates the E-mail server you use for exchanging E-mail.
If you leave this field blank, WL-700gE uses the mail server of your E-mail address
in Send to field.
Subject - This field is for the subject of E-mail.
Attach Image File? - This field allows you to attach the captured image in the
E-mail.
Remote monitors
This function allows you to monitor up to 6 Web Cameras in your LAN. You
can enter the IP addresses of other ASUS Wireless Routers which have Web
Camera attached.
Note: When enabling "LAN and WAN" remote control in the Wireless Router,
packets from Internet with destination ports 8081 to 8086 will be forwarded
to WL-700gE in Remote Control fields. To make sure packets from WL-
700gE are routed back to Internet, you need to set a static route entry for
WL-700gE. The IP address and gateway address are same as the address
of WL-700gE.
Enable Web Camera to WAN users
With proper setting to DDNS, you can monitor your working environment
from anywhere on Internet, even if dynamic WAN IP address is used. If
any motion is detected by the camera, WL-700gE captures the images and
send them to your appointed E-mail box.
Remote Site 1-6 - This field stands for the IP address and port number of Remote
Site. The value of this field is [IP Address]:[Connection Port].
Preview - Click Preview to see the view of all the Web Camera sites you set in
Remote Site.