Asus M3N78-AM - Manual (Page 46)

2-10 ASUS M3N78-AM
Type [Auto]
Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate
IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select
[ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
This item does not appear when you select the SATA 1/2/3/4 devices.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-Sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
feature. When set to [Disabled], the data transfer from and to the device occurs one sector
at a time. Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]
2.3.5 Storage Configuration
The Storage Configuration menu allows you to configure your storage devices. Select an
item then press to display the submenu.
Onboard PCI IDE Controller [Enabled]
Allows you to enable or disable the onboard PCI IDE controller.
Configuration options: [Enabled] [Disabled]
OnChip SATA Controller [Enabled]
Allows you to disable or enable the OnChip SATA Controller.
Configuration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Configuration options: [SATA Mode] [RAID Mode] [AHCI Mode]