Asus Terminator P4 533 - Manual (Page 19)

ASUS Terminator P4 533 Barebone System 19
2.3 Install a CPU
The P4SC-E motherboard comes with a surface mount 478-pin Zero
Insertion Force (ZIF) socket. This socket is specifically designed for the
Intel
® Pentium ® 4 478/Northwood Processor.
Follow these steps to install a CPU.
1. Locate the 478-pin CPU
socket on the motherboard.
Socket lever 90 - 100
2. Unlock the socket by pressing
the lever sideways then lifting
it up to a 90°-100° angle.
IMPORTANT
Make sure that the socket lever is lifted up to 90°-100° angle, otherwise
the CPU does not fit in completely.
478-pin CPU socket