Asus M4A88T-M/USB3 - Manual (Page 52)

2-10 Chapter 2: BIOS information
The following item only appears when you set CPU Overclocking to [Manual].
CPU/HT Reference Clock (MHz) [200]
Sets the CPU/HT Reference Clock. Configuration options: [Min.=200] [Max.=550]
The following item only appears when you set CPU Overclocking to [Overclock Profile].
Overclock Options [Auto]
Selects the overclocking profile. Configuration options: [Auto] [Overclock 2%]
[Overclock 5%] [Overclock 8%] [Overclock 10%]
GPU Engine Clock [700]
Sets the GPU Engine Clock. Configuration options: [Min.=200] [Max.=2000]
PCIE Overclocking [Auto]
Sets the PCIE overclocking. Configuration options: [Auto] [Manual]
The following item only appears when you set PCIE Overclocking to [Manual].
PCIE Clock [100]
Sets the PCIE Clock. Configuration options: [Min.=100] [Max.=150]
Processor Frequency Multiplier [Auto]
Sets the processor frequency multiplier. Configuration options: [Auto] [x4.0 800MHz]
[x4.5 900MHz] [x5.0 1000MHz] ~ [x15.0 3000MHz]
CPU/NB Frequency [Auto]
Sets CPU/NB frequency. Configuration options: [Auto] [4.00x] [5.00x] ~ [10.00x]
CPU Over Voltage [Auto]
Sets the CPU over voltage. The value range depends on the CPU installed. Key in the value
directly or use +/- to adjust the voltage. Configuration options: [Auto]
VDDNB Over Voltage [Auto]
Sets the VDDNB over voltage. The value range depends on the CPU installed. Key in the
value directly or use +/- to adjust the voltage. Configuration options: [Auto]
LoadLine Calibration [Auto]
Sets LoadLine. The value ranges from 0% to 100% with a 3.225% increment. Use the <+> /
<-> keys to adjust the value. Configuration options: [Auto] [Max. = 100%] [Min. = 0%]
HT Link Frequency [Auto]
Sets the HyperTransport link speed. Configuration options: [200MHz] [400MHz] [600MHz] ~
[2000MHz] [Auto]
HT Link Width [Auto]
Sets the HyperTransport link width. Configuration options: [Auto] [8 Bit] [16 Bit]