Asus P4S800 - Manual (Page 55)

ASUS P4S800 motherboard user guide 2-21
Power Management [User Defined]
This field allows you to activate or deactivate the automatic power saving features.
When set to [Disabled], the power management features do not function
regardless of the other settings on this menu. The [User Defined] option allows you
to set the period of inactivity before the system enters suspend mode. Refer to
“Suspend Mode” item.
When set to [Max Saving], system power is conserved to its greatest amount. This
setting automatically puts the system into suspend mode after a brief period of
system inactivity. [Min Saving] allows the least power saving as the system enters
suspend mode only after a long period of inactivity. Configuration options: [User
Defined] [Disabled] [Min Saving] [Max Saving]
2.5 Power Menu
The Power menu allows you to reduce power consumption. This feature turns off
the video display and shuts down the hard disk after a period of inactivity.
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor power
management. Configuration options: [Always On] [Suspend -> Off]
Video Off Method [DPMS OFF]
This field defines the video off features. The Display Power Management System
(DPMS) feature allows the BIOS to control the video display card if it supports the
DPMS feature. [Blank Screen] only blanks the screen. Use this for monitors without
power management or “green” features. [V/H SYNC+Blank] blanks the screen and
turns off vertical and horizontal scanning.
Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS Standby] [DPMS
Suspend] [DPMS OFF] [DPMS Reduce ON]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inactivity as
set in this user-configurable field. This feature does not affect SCSI hard drives.
Configuration options: [Disabled] [1 Min] [2 Min] [3 Min]...[15 Min]
ACPI Suspend To RAM [Disabled]
This field allows you to enable or disable the ACPI Suspend-to-RAM feature. To
support this feature, the +5VSB of the power supply should have the capacity to
provide more than 720mA current. Configuration options: [Disabled] [Enabled]