Asus P4S800 - Manual (Page 32)

1-22 Chapter 1: Product introduction
10. USB header (10-1 pin USB56)
If the USB ports on the rear panel are inadequate, a USB header is available
for additional USB ports. The USB header complies with USB 2.0 specification
that supports up to 480 Mbps connection speed. This speed advantage over
the conventional 12 Mbps on USB 1.1 allows faster Internet connection,
interactive gaming, and simultaneous running of high-speed peripherals.
You may connect an optional USB 2.0/GAME module, connect the USB cable
to this header. The module has two USB 2.0 ports that support the next
generation USB peripherals such as high resolution cameras, scanners, and
printers.
P4S800
®
P4S800 USB 2.0 Header
USB56
USB+5V USB_P6- USB_P6+ GND OC#
USB+5V USB_P5- USB_P5+
GND
1
The USB/GAME module is purchased separately.
11. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for a S/PDIF audio module that allows digital instead of
analog sound output. If the S/PDIF out port at the rear panel is inadequate use
this to connect one end of the audio cable to the S/PDIF_OUT connector on
the motherboard, and the other end to the S/PDIF module.
P4S800
®
P4S800 Digital Audio Connector
+5V SPDIFOUT GND
SPDIF_OUT
The S/PDIF module is purchased separately.
Do not connect
OC# to GND,
the system may
become
unstable.