Asus P/I-AP55TV - Manual (Page 68)

62 ASUS P/I-AP55TV User's Manual
VI. Video Driver Installation
(Windows NT)
VI. V
ideo Installation
Microsoft Windows NT 3.5, 3.51, 4.0
The mach64 driver for Windows NT is shipped with Windows NT. Before installing
the mach64 driver, you must have installed Windows NT and selected VGA display.
Installation Procedure:
1. Boot Windows NT
2. Double-click the “Main” icon.
3. Double-click the “Control Panel” icon.
4. Double-click the “Display” icon.
5. Click “Change Display Type”.
6. Click “Change”.
7. Insert the installation CD into the CD-ROM drive.
8. Click “Other”.
9. Supply the Setup program with the location of the NT files, for example, type:
D:\NT35\ENGLISH (or) \NT351\ENGLISH (or) \NT40\ENGLISH
10. Click OK
11. Select the appropriate driver for your ASUS 264 series card
12. Click Install
13. Click Yes to change to your system configuration.
14. Click Continue to confirm the full path name.
15. If you are upgrading your driver, you will be asked whether you want to use
the “Current” or “New” driver. Select “New” driver to install the drivers.
16. After the files have been copied to your computer, click OK
17. Reboot Windows NT
18. After reboot the Invalid Display Settings window appears - Click OK
19. The Display Settings dialogue box appears - Select a desired display mode.
For more detailed information about changing your display mode, click Help.
De-Installation Procedure:
You may de-install the mach64 driver for Windows NT using either of the steps
shown here:
1. In the WINNT\SYSTEM32\DRIVERS directory, rename the ATI.SYS file,
for example, to ATI.ATI. When you restart Windows NT, it will not find
ATI.SYS, and boot up in VGA.
2. Run the Windows NT Setup program and select a non-ATI driver, for example,
a VGA-Compatible driver. When you restart Windows NT, it will boot up with
the non-ATI driver you just selected.