Asus P/I-AP55TV - Manual (Page 65)

ASUS P/I-AP55TV User's Manual 59
VI. V
ideo Installation
(Utilities Install)
VI. Video Driver Installation
Utilities Installation
Windows 3.x, AutoCAD, Microstation
NOTE: The INSTALL program must be run in DOS mode. It cannot run in a
Windows DOS shell or prompt. You must complete the Utilites Installation
before using the driver installation.
Installation Procedures:
1. Turn on the monitor, then the computer.
2. Enter DOS mode (C:\ prompt) environment.
3. Insert the CD and type (assuming your CD-ROM drive is letter D), type:
D:
CD\
INSTALL
(or) D:\OTHERS\JAPANESE\INSTALL
4. Choose Utilities Installation and press .
5. Press for the default path when you are prompted.
6. After the installation is completed, you will be prompted to allow changes to
your autoexec.bat file. Enter to accept changes.
7. Exit to DOS by pressing & .
OS/2 & OS/2 Warp
Substitute these procedures for numbers 2-3 above:
1. Start OS/2
2. Check that OS/2 is using a standard VGA driver and no other applications are
running.
3. Double-click the OS/2 System folder.
4. Double-click the Command Prompts folder.
5. Double-click the OS/2 Full Screen object.
6. Insert the installation CD into the CD-ROM drive
7. Type D:\OTHERS
8. Type OS2INST