Asus A7N8X-E Deluxe - Manual (Page 105)

ASUS A7N8X-E Deluxe motherboard 5-11
5.4 NVIDIA ® NVSwap 1.0 Utility
Running the NVSwap Application
NVSwap 1.0 sets up and optimizes your audio experience when you use
NVIDIA
® audio products such as the NVIDIA SoundStorm™ audio
solution. This software helps you configure your speaker setup on NVIDIA
nForce™ motherboards equipped with an audio processing unit (APU) or
a standard soft audio.
NVSwap is a self-contained application that requires no installation in
order to function. To use NVSwap, execute the application found in
“\Drivers\All-in-one\nvswap” of the motherboard support CD. You will see
a dialogue box similar to the following:
Line In and Rear
Speaker toggle button
Microphone In and
Center and Subwoofer
toggle button
Center and Subwoofer
speaker toggle button
Testing the Speakers
Immediately after you run the application, the application begins cycling
through the speakers with white noise. You see a visual indication of
where audio should be coming from. If you do not hear audio coming from
the highlighted speaker, checkt he connections between the sound jacks
at the rear of your PC and your speaker system.
If you want to test a specific speaker, left-click on the appropriate speaker
icon. This action causes white noise to play on the selected speaker for up
to 5 seconds before returning to the cycling pattern.
For 6.1 audio channel setting, there is no need to perform the following
tasks. Simply connect the Rear Speaker to the purple jack and the
Center/Subwoofer to the orange jack.