Asus A8N-SLI Premium - Manual (Page 91)

A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m A S U S A 8 N - S L I P r e m i u m 4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Frequency/Voltage control
Plug & Play O/S [No]
Init Display First [PCI Slot]
Resources Controlled By [Auto]
x IRQ Resources
PCI/VGA Palette Snoop [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
4.4.2 4.4.2 4.4.2 4.4.2 4.4.2 PCIPnP PCIPnP PCIPnP PCIPnP PCIPnP
Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When
set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot. Configuration options: [No] [Yes]
Resources Controlled By [Auto] Resources Controlled By [Auto] Resources Controlled By [Auto] Resources Controlled By [Auto] Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and
Plug and Play compatible devices. Set to [Manual] if you want to assign the
IRQ DMA and memory base address fields.
Configuration options: [Auto] [Manual]
When the item Resources Controlled By is set to [Auto], the item IRQ
Resources is grayed out and not user-configurable. Refer to the section
“IRQ Resources” for information on how to enable this item.