Asus CUR-DLSR - Manual (Page 80)

80 ASUS CUR-DLSR User’s Manual
5. Motherboard Driver Installation
5. Driver Installation
WinNT4.0 Server
III. ATI Rage XL Display Driver Installation
1. Start up Windows NT in VGA mode.
2. Run the Windows NT Display program located in the Control Panel, under
Settings in the Start menu or right click the mouse button on the desktop and
select Properties from the popup menu.
3. Select the Settings tab.
4. Select Display Type....
5. Select Change... from the display options.
6. Select Have Disk...
7. Windows NT system will prompt you for the correct path, enter the path of the
driver, such as D:\ATI\NT40 (assuming your CD-ROM drive is letter D)
8. A list of video adapters will be displayed. Select the “XPERT LCD PCI”,
then click on OK button.
9. Windows NT will once again prompt for confirmation. All appropriate files
are then copied to the hard disk. Select Apply in Control Panel.
10. The installed driver will become active once you restart Windows NT.