Asus M5A88-M EVO - Manual (Page 73)

ASUS M5A88-M EVO 2-25
2.7 Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press to display the sub-menu.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
M5A88-M EVO BIOS Setup
Main Ai Tweaker Advanced Power Boot Tools Exit
Boot Device Priority
Boot Settings
2.7.1 Boot Device Priority
1st ~ xxth Boot Device [xxx Drive]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev.] [Hard Drive]
[ATAPI CD-ROM] [Disabled]
• To select the boot device during system startup, press when ASUS Logo appears.
• To access Windows
® OS in Safe Mode, do any of the following:
• Press when ASUS Logo appears.
• Press after POST.
2.7.2 Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting
to decrease the time needed to boot the system. When this item is set to [Disabled], BIOS
performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Enables or disables the full screen logo display feature. Configuration options: [Disabled]
[Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Version 0203
2.6.7 NB Thermal Protect [Enabled]
Allows you to enables or disables NB Thermal Protect. If set to [Enabled], the system will
shut down when the temperature of NB is over 95ºC to protect the NB chipset. Configuration
options: [Enabled] [Disabled]