Asus M5A88-M EVO - Manual (Page 72)

2-24 Chapter 2: BIOS information
Power on By PS/2 Keyboard [Disabled]
Enables or disables PS/2 Keyboard to generate a wake event.
Configuration options: [Disabled] [Space Bar] [Power Key] [Ctrl - Esc]
Power on From S5 By RTC Alarm [Disabled]
Enables or disables RTC to generate a wake event. Configuration options: [Disabled]
[Enabled]
2.6.5 HW Monitor Configuration
CPU / MB Temperature [xxxºC/xxxºF] or [Ignored]
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select [Ignored] if you do not want the detected temperatures to be displayed.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU / Chassis / Power
fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the
field shows N/A. Select [Ignored] if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xx.xxxV] or [Ignored]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignored] if you do not want the detected voltage to be displayed.
CPU / Chassis Q-Fan Function [Enabled]
Enables or disables the CPU / Chassis Q-Fan control feature. Configuration options:
[Disabled] [Enabled]
The following item appears only when you set CPU / Chassis Q-Fan Function to
[Enabled].
CPU / Chassis Fan Speed Low Limit [200 RPM]
Allows you to manually set a lower limit for the CPU / Chassis fan speed. If the CPU /Chassis
fan speed is below the specified limit, the system sends out warning beeps. Configuration
options: [500 RPM] [400 RPM] [300 RPM] [200 RPM] [100 RPM] [Ignored]
CPU / Chassis Q-Fan Mode [Standard]
This item appears only when you enable the CPU / Chassis Q-Fan Function feature and
allows you to set the appropriate performance level of the CPU / Chassis fan.
[Standard] Sets to [Standard] to make the CPU / Chassis fan automatically adjust
depending on the CPU / Chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU / Chassis fan
operation.
[Turbo] Set to [Turbo] to achieve maximum CPU / Chassis fan speed.
[Manual] Allows you to individually set the CPU / Chassis fan parameters.
2.6.6 Anti Surge Support [Enabled]
Enables or disables the Anti Surge support. Configuration options: [Disabled] [Enabled]