Asus P5VD2-VM SE - Manual (Page 97)

ASUS P5VD2-VM SE 3-13
Use arrow keys to move selection bar on items and press to select.
7. Select Start Create Process and press to set up hard disk for RAID
system. The following confirmation message appears:
8. Press to confirm or to return to the configuration options.
9. Press to go back to main menu.
RAID 1 for data protection
1. From the create array menu, select Array Mode, then press . The
supported RAID configurations appear on a pop-up menu.
The data on the selected disks will
be destroyed. Continue? (Y/N)
4K
8K
16K
32K
64K
TIP: For server systems, use of a lower array block
size is recommended. For multimedia computer
systems used mainly for audio and video editing, a
higher array block size is recommended for optimum
performance.
4. Press to confirm or to return to the configuration options. If you
selected , proceed to step 9.
5. Select Select Disk Drives, then press . Use arrow keys to select disk
drive, then press to mark selected drive. An asterisk appears before
a selected drive.
6. Select Block Size, then press to set array block size. A list of valid
array block sizes are displayed on a pop-up menu.
2. Select RAID 1 for data protection then press .
RAID 0 for performance
RAID 1 for data protection
RAID SPAN for capacity