beautypg.com

Ix. software drivers, Double bytes os/2 warp, 1 driver files – Asus P/I-P55SP4V User Manual

Page 96: 2 installation

background image

90

ASUS P/I-P55SP4V User’s Manual

IX. SOFTWARE DRIVERS

(2 Byte OS/2 W

arp)

IX. Software Drivers

8. Double Bytes OS/2 Warp

8.0 Driver & OS/2 Version Notes

1. The following description apply to “SiS 5596 Driver Release V1.02d” and

maybe later release version but not guaranteed.

2. The following description apply to “Double Bytes OS/2 Warp” only. (i.e.

Chinese, Japanese, Korea, etc.)

8.1 Driver Files

The enclosed SiS 5596 Double Byte OS/2 3.0 driver contains the following files:

SETUP.CMD

SiS driver install program

SVGA.EXE

SiS PMI Generator

S768256.DL@

SiS IBMDEV32.DLL Display Driver

OTHERS

other files required during installation

8.2 Installation

For Double Byte OS/2 Warp limitation, the installation process is a two phase
installation and can’t complete the whole installation in one-time-process.
1st phase
: copy files, modify “config.sys”, create “SiS Install” icon then
shutdown and re-boot OS/2.
2nd phase: double clicks “SiS Install” icon to complete the installation

Before install SiS 5596 OS/2 drivers, make sure:
1. Install your OS/2 system using “VGA display” option (i.e. standard VGA).
2. Start your OS/2 system.

Install SiS 5596 OS/2 Warp drivers as following procedures:
1st phase:

1. Enter “OS/2 window” or “OS/2 full screen”.
2. Change directory to which holds the SiS 5596 OS/2 3.0 display drivers and

type SETUP , For example, A:\OS2\DBCS.30>SETUP

3. All the Driver Files will be copied to a subdirectory C:\SISDRV and “SiS

Install” icon would be created.

4. After completing “setup” program, shutdown and re-boot OS/2.

2nd phase:

5. After re-booting OS/2, double clicks “SiS Install” icon. Then the “SiS Install”

icon would be executed automatically and “Select Screen parameters for SiS
SVGA” screen would appeared on the screen.

6. Select the desired resolution (and color) and frame rate on this screen, then

click “OK” to complete installation and “SiS Setup” icon would be created for
future change modes and frame rate usage.

7. After completing installation, shutdown and re-boot OS/2 to make your

selection effectively.