Iii. installation, Connectors) iii. inst alla tion – Asus P/I-P55SP4V User Manual
Page 27
![background image](/manuals/300335/27/background.png)
ASUS P/I-P55SP4V User’s Manual
21
5. Floppy drive connector (34-pin block )
This connector supports the provided floppy drive ribbon cable. After
connecting the single end to the board, connect the two plugs on the other end
to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong
orientation when using ribbon cables with pin 5 plugged).
Floppy Drive Connector
Pin 1
6. Power connector (12-pin block)
This connector connects to a standard 5 Volt power supply. To connect the
leads from the power supply, ensure first that the power supply is not plugged.
Most power supplies provide two plugs (P8 and P9), each containing six wires,
two of which are black. Orient the connectors so that the black wires are
located in the middle.
Using a slight angle, align the plastic guide pins on the lead to their receptacles
on the connector. Once aligned, press the lead onto the connector until the
lead locks into place.
Power Plugs from
Power Supply
Power Connector
on Motherboard
PG
+5V
-12V
-5V
GND
+5V
+12V
P9
P8
ORG
RED
YLW
BLU
BLK
BLK
BLK
BLK
WHT
RED
RED
RED
III. INSTALLATION
(Connectors)
III. INST
ALLA
TION