Asus M4A77T/USB3 - Manual (Page 50)

2-12 Chapter 2: BIOS information
TWR [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [10 CLK] [12 CLK]
TRRD [Auto]
Configuration options: [Auto] [4 CLK] ~ [7 CLK]
TRWTTO [Auto]
Configuration options: [Auto] [3 CLK] ~ [17 CLK]
TWRRD [Auto]
Configuration options: [Auto] [2 CLK] ~ [10 CLK]
TWTR [Auto]
Configuration options: [Auto] [4 CLK] ~ [7 CLK]
TWRWR [Auto]
Configuration options: [Auto] [3 CLK] ~ [10 CLK]
TRDRD [Auto]
Configuration options: [Auto] [3 CLK] ~ [10 CLK]
TRFC0/1 [Auto]
Configuration options: [Auto] [90ns] [110ns] [160ns] [300ns] [350ns]
TREF [Auto]
Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms]
DCT0:CKE drive strength [Auto] / DCT1:CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:CS/ODT drive strength [Auto] / DCT1:CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:ADDR/CMD drive strength [Auto] / DCT1:ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:MEMCLK drive strength [Auto] / DCT1:MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Data drive strength [Auto] / DCT1:Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:DQS drive strength [Auto] / DCT1:DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Processor ODT [Auto] / DCT1:Processor on-die terminat [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%]
[60 ohms +/- 20%]
Chipset Over Voltage [Auto]
Sets the chipset over voltage. The values range from 1.10000V to 1.60000V with a 0.01000V
increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto]
[Max. = 1.60000V] [Min. = 1.10000V]
PCI/PCIe CLK Status [Enabled]
Enables or disables the clock for PCI/PCIe slots. Configuration options: [Disabled] [Enabled]