Asus M4A77T/USB3 - Manual (Page 49)

ASUS M4A77T/USB3 2-11
DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
TCL [Auto]
Configuration options: [Auto] [4 CLK] ~ [12 CLK]
TRCD [Auto]
Configuration options: [Auto] [5 CLK] ~ [12 CLK]
TRP [Auto]
Configuration options: [Auto] [5 CLK] ~ [12 CLK]
TRAS [Auto]
Configuration options: [Auto] [15 CLK] ~ [30 CLK]
TRTP [Auto]
Configuration options: [Auto] [4 CLK] ~ [7 CLK]
TRC [Auto]
Configuration options: [Auto] [11 CLK] ~ [41 CLK]
The configuration options for some of the following items vary depending on the DIMMs you
install on the motherboard.
LoadLine Calibration [Auto]
Sets LoadLine. The values range from 0% to 100% with a 3.225% increment. Use the <+> /
<-> keys to adjust the value. Configuration options: [Auto] [Max. = 100%] [Min. = 0%]
HT Link Speed [Auto]
Sets the HyperTransport link speed. Configuration options: [Auto] [200MHz] [400MHz]
[600MHz] [800MHZ] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
HT Link Width [Auto]
Sets the HyperTransport link width. Configuration options: [Auto] [4 Bit] [8 Bit] [16 Bit]
HT Over Voltage [Auto]
Sets the HT over voltage. The values range from 1.20000V to 1.38000V with a 0.01000V
increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto] [Max. =
1.38000V] [Min. = 1.20000V]
DRAM Frequency [Auto]
Selects the DRAM frequency programming method. If this item is set to [Auto], the DRAM
speed depends on the SPDs. Configuration options: [Auto] [800MHz] [1067MHz] [1333MHz]
[1600MHz]
Memory Over Voltage [Auto]
Sets the memory over voltage. The values range from 1.2000V to 2.4450V with a
0.0750V(1.2V~1.5V) or 0.0150V(1.5V~2.445V) increment. Use the <+> / <-> keys to adjust
the value. Configuration options: [Auto] [Max. = 2.4450V] [Min. = 1.2000V]
DRAM Timing/Driving Configuration