Asus M2N68-AM - Manual (Page 52)

2-14 Chapter 2: BIOS setup
Memclock Value [200 MHz]
Allows you to set the Memclock value. Configuration options: [200 MHz] [266 MHz]
[333 MHz] [400 MHz] [533 MHz]
DRAM Timing Mode [Auto]
Allows you to set the DRAM timing mode. Configuration options: [Auto] [DCT 0]
Memory Over Voltage [Auto]
Allows you to set the memory over voltage. The value ranges from 1.85000V to 2.24375V
with a 0.00625V interval. Configuration options: [Auto] [1.85000V] [2.24375V]
Chipset Over Voltage [Auto]
Allows you to set the chipset over voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
The following item appears only when the Memory clock mode item is set to [Manual].
2.4.2 CPU Configuration
GART Error Reporting [Disabled]
This option should remain disabled for the normal operation. The driver developer may
enable it for testing purpose. Configuration options: [Disabled] [Enabled]
Microcode Updation [Enabled]
Allows you to enable or disable the microcode updation.
Configuration options: [Disabled] [Enabled]
Secure Virtual Machine Mode [Enabled]
Allows you to enable or disable the AMD Secure Virtual Machine.
Configuration options: [Disabled] [Enabled]
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the sub-menu.
NorthBridge Configuration
Memory Configuration
Bank Interleaving [Disabled]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Auto]