Asus M2N68-AM - Manual (Page 41)

ASUS M2N68-AM 2-3
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch
EZ Flash 2 in either of these two ways:
a. Press + during POST to display the following:
2.1.3 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
b. Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press to enable it.
Press to switch between drives until the correct BIOS file is found.
2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating process
and automatically reboots the system when done.
• This function supports devices such as USB flash disks or floppy disks with FAT 32/16
format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.06
Current ROM Update ROM
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: M2N68-AM
VER: 0303
DATE: 07/28/08
BOARD: Unknown
VER: Unknown
DATE: Unknown