Asus E45M1-M PRO - Manual (Page 31)

1-21 Chapter 1: Product introduction
1.12 Onboard LEDs
1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
2. Turbo Key II LED
The Turbo Key II LED lights when the Turbo Key II switch is turned to Enable.
SB_PWR
ON
Standby Power Powered Off
OFF
E45M1-M PRO
E45M1-M PRO Onboard LED
E45M1-M PRO
E45M1-M PRO Turbo Key II LED
O2LED2