Asus CUC2000 - Manual (Page 72)

ASUS CUC2000 User’s Manual 72
4. BIOS SETUP
4. BIOS SETUP
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Disabled] leaves your system off and [Enabled] reboots your sys-
tem. [Previous State] sets your system back to the state it is before the power inter-
ruption. Configuration options: [Disabled] [Enabled] [Previous State]
PWR Up On Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the modem receives a call while the computer is in Soft-off mode. NOTE:
The computer cannot receive or transmit data until the computer and applications
are fully running. Thus connection cannot be made on the first try. Turning an exter-
nal modem off and then back on while the computer is off causes an initialization
string that will also cause the system to power on. Configuration options: [Disabled]
[Enabled]
Wake On LAN [Enabled]
Wake-On-LAN allows your computer to be booted from another computer via a
network by sending a wake-up frame or signal. Configuration options: [Disabled]
[Enabled]
IMPORTANT: This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.
4.5.1 Power Up Control
Power Up Control