Hardware setup – Asus CUC2000 User Manual

Page 34

ASUS CUC2000 User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

6) Game/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)

You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.

7) Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)

Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.

Mic

Line In

Line Out

1/8" Stereo Audio Connectors

8) Chassis Intrusion Lead (4-1 pin CHASSIS)

This requires an external detection mechanism such as a chassis intrusion moni-
tor/sensor or microswitch. The sensor is triggered when a high level signal is
sent to the Chassis Signal lead, which occurs when a panel switch or light detec-
tor is triggered. This function requires the optional ASUS CIDB chassis intru-
sion module to be installed (see 7. APPENDIX). If the chassis intrusion lead is
not used, a jumper cap must be placed over the pins to close the circuit.

CUC2000

CUC2000 Chassis Open Alarm Lead

+5V

olt

(Power Supply Stand By)

Ground

Chassis Signal

CHASSIS