Asus M5A97 EVO R2.0 - Manual (Page 94)

3-20 Chapter 3: BIOS setup
Chapter 3
3.5.3 South Bridge Configuration
HPET [Enabled]
Allows you to set the HPET timer.
Configuration options: [Disabled] [Enabled]
3.5.4 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA
Port items show Not Present if no SATA device is installed to the corresponding SATA port.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Options for SATA Configuration.
Back Advanced\ SATA Configuration >
UEFI BIOS Utility - Advanced Mode
SATA Configuration
SATA6G_1 Not Present
SATA6G_2 Not Present
SATA6G_3 Not Present
SATA6G_4 Not Present
SATA6G_5 Not Present
SATA6G_6 Not Present
> SB SATA Configuration
SB SATA Configuration
Options for SATA Configuration.
OnChip SATA Channel [Enabled]
[Enabled] Enables the onboard channel SATA port.
[Disabled] Disables the onboard channel SATA port.
The following items appear only when you set the OnChip SATA Channel item to
[Enabled].
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
HPET Timer
UEFI BIOS Utility - Advanced Mode
Back Advanced\ South Bridge >
HPET Disabled