Chapter 3, Updating the bios file – Asus M5A97 EVO R2.0 User Manual
Page 117

ASUS M5A97 EVO R2.0
3-43
Chapter 3
4.
Select Yes and press
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.
At the FreeDOS prompt, type bupdater /pc /g and press
2.
The BIOS Updater screen appears as below.
3.
Press
to select the BIOS file and press
and prompts you to confirm BIOS update.
D:\>bupdater /pc /g
ASUSTek BIOS Updater for DOS V1.30 [2012/12/22]
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
M5A97E20.CAP 2097152 2012-01-06 17:30:48
PATH:
BOARD:
M5A97 EVO R2.0
VER:
0206
DATE:
06/18/2012
FLASH TYPE:
MX1C 25L1065A
BOARD:
VER:
DATE:
A:\
UNKNOWN
UNKNOWN
UNKNOWN
Are you sure to update BIOS?
Yes
No