Asus M5A97 EVO R2.0 - Manual (Page 100)

3-26 Chapter 3: BIOS setup
Chapter 3
3.5.8 APM
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Allow BIOS to switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
other PME options will be switched off.
Back Advanced\ APM >
UEFI BIOS Utility - Advanced Mode
Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
ERP Ready Disabled
Restore AC Power Loss Power Off
Power On By PS/2 Device Disabled
Power On By PME Device Disabled
Power On By Ring Disabled
Power On By RTC Disabled
ErP Ready [Disabled]
[Disabled] Disables the Energy Related Products (ErP) Ready function.
[Enabled] Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Device [Disabled]
[Disabled] Disables the PS/2 devices from generating a wake event.
[Enabled] Enables the PS/2 devices to generate a wake event.
Power On By PME Device [Disabled]
[Disabled] Disables the PME devices from generating a wake event.
[Enabled] Enables the PME devices to generate a wake event.