Asus Rampage III Formula User Manual

Page 67

2. Marvell

Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 �red�)

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.

• These connectors are set to Standard IDE mode by default. In Standard

IDE mode, you can connect Serial ATA data hard disk drives to these
connectors.

• You must install Windows

XP Service Pack 2 or later versions before using

Serial ATA hard disk drives.

• When using hot-plug and NCQ, set the

Onboard SATA6G Controller

item in the BIOS to [AHCI Mode]. Refer to section

3.5.3 Onboard Devices

Configuration for details.

ROG Rampage III Formula

2-39