Asus Rampage III Formula - Manual (Page 105)

ROG Rampage III Formula 3-21
�.4.� AHCI Configuration
This menu is the section for AHCI configuration. It appears only when you set the
item
Configure SATA as from the sub-menu of SATA Configuration to [AHCI].
Rampage III Formula BIOS Setup Version 0206
Main
AHCI Settings
AHCI CD/DVD Boot Time Out [35]
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.
SATA Port1–6 �XXXX�
Displays the status of auto-detection of SATA devices.
Rampage III Formula BIOS Setup Version 0206
Main
SATA Port1
Device :Not Detected
SATA Port1 [Auto]
SMART Monitoring [Enabled]
Select the type
of devices connected
to the system.
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configration options: [Disabled] [Enabled]
AHCI CD/DVD Boot Time out �35�
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]