Asus Rampage III Formula - Manual (Page 132)

3-48 Chapter 3: BIOS Setup
�.8.5 Drive Xpert Configuration
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Rampage III Formula BIOS SETUP Version 0206
Tools
Update Drive Xpert
Mode changes after
saving changes and
exiting BIOS setup.
Discard Drive Xpert
Mode changes after
exiting BIOS setup
without saving any
changes.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Drive Xpert Configuration
Drive Xpert Group:
Current Mode :Normal Mode
Driver Xpert Mode Update:
Update To Super Speed [Press Enter]
Update To EZ Backup [Press Enter]
Update To Normal Mode [Press Enter]
Drive Xpert Device(s) List:
Port 0 : [Not Detected]
Port 1 : [Not Detected]
Drive Xpert Mode Update:
Update To Super Speed [Press Enter]
Allows you to use the Super Speed function that combines two hard drives
as one single drive partition.
All original data of the two hard drives will be erased for Super Speed setup.
Update To EZ Backup [Press Enter]
Allows you to use the EZ Backup function that copies and maintains an
identical image of data from the SATA_6G_1 drive to the SATA_6G_2 drive.
All original data of the SATA_6G_2 hard disk will be erased for EZ Backup
setup.
• Before using the Drive Xpert function, ensure that you have connected the
SATA signal cables and installed SATA hard disk drives to the SATA_6G_1
and SATA_6G_2 connectors.
• You can only make one Drive Xpert change a time before you save BIOS
settings and restart the computer.
Drive Xpert Group:
Current Mode
Displays the current Drive Xpert mode.
Changed Mode
This item appears only when you select a Drive Xpert mode to update and
displays the Drive Xpert mode that you have changed.