Asus P5P43T - Manual (Page 54)

2-16 Chapter 2: BIOS information
Front Panel Type [HD Audio]
Allows you to select the front panel type. If High Definition Audio Front Panel used,
please set HD Audio mode. Configuration options: [AC97] [HD Audio]
JMB368 IDE [Enabled]
Allows you to enable or disable the JMB368 IDE controller.
Configuration options: [Disabled] [Enabled]
JMB368 IDE BOOTROM [Enabled]
Allows you to enable or disable the JMB368 IDE Boot ROM. This item appears only
when the JMB368 IDE item is set to Enabled.
Configuration options: [Disabled] [Enabled]
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard LAN item is set to Enabled. Configuration options:
[Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378]
[278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set
the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]
2.5.4 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press to display the configuration options.
The Module Version and USB Devices Enabled items show the auto-detected values. If no
USB device is detected, the item shows None.