beautypg.com

Asus P5P43T User Manual

Page 51

background image

ASUS P5P43T

2-13

Ai Clock Twister [Auto]

Allows you to set the DRAM performance. Configuration options: [Auto] [Lighter] [Light]

[Moderate] [Strong] [Stronger]

Ai Transaction Booster [Auto]

Allows you to set the system performance. Configuration options: [Auto] [Manual]

The following items appear only when you set the Ai Transaction Booster item to [Manual].

C/P : A1 A2

LVL : 08 08

Common Performance Level [05]

Set this item to a higher level for better compatiility or a lower level for better

performance. Use the <+> and <-> keys to adjust the value.

Pull-In of CHA/CHB PH1/2 [Disabled]

Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase

1 and 2. The number of phases is determined by DRAM frequency and FSB strap.

Configuration options: [Disabled] [Enabled]

Auto PSI [Enabled]

Allows you to enable or disable the Auto PSI. Configuration options: [Enabled] [Disabled]

SB Voltage [Auto]

Allows you to set the South Bridge voltage. Configuration options: [Auto] [1.5V] [1.6V]

Memory Over Voltage [Auto]

Allows you to set the memory over voltage. The values range from 1.20000V to 2.44500V

with a 0.01500V interval. Use the <+> and <-> keys to adjust the value. Configuration options:

[Auto]

Setting a high voltage may damage the component permanently, and setting a low voltage

may make the system unstable.

Chipset Over Voltage [Auto]

Allows you to set the chipset over voltage. The values range from 1.10000V to 1.49750V with

a 0.00625V interval. Use the <+> and <-> keys to adjust the value. Configuration options:

[Auto]

VTT Over voltage [Auto]

Allows you to set the VTT over voltage. The values range from 1.20000V to 1.58750V with a

0.00625V interval. Use the <+> and <-> keys to adjust the value. Configuration options: [Auto]

CPU VCORE Over-Voltage [Auto]

Allows you to set the CPU VCORE over-voltage. The values range from 0.01000V

to 0.63000V with a 0.00625V interval. Use the <+> and <-> keys to adjust the value.

Configuration options: [Auto]