12 cpu differential amplitude [auto, 13 cpu clock skew [auto, 14 cpu voltage mode [offset – Asus P7H55-M/USB3 User Manual
Page 62
2-16
ASUS P7H55-M/USB3
DRAM READ to READ Delay(DD) [Auto]
Configuration options: [Auto] [2 DRAM Clock] ~ [9 DRAM Clock]
DRAM READ to READ Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] ~ [9 DRAM Clock]
DRAM READ to READ Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
DRAM WRITE to WRITE Delay(DD) [Auto]
Configuration options: [Auto] [2 DRAM Clock] ~ [9 DRAM Clock]
DRAM WRITE to WRITE Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] ~ [9 DRAM Clock]
DRAM WRITE to WRITE Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
2.4.12
CPU Differential Amplitude [Auto]
Different AMP might enhance BCLK overclocking ability.
Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
2.4.13
CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need to adjust
the NB Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps] ~ [Delay 1500ps]
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the
value. To restore the default setting, type [auto] using the keyboard and press the
key.
2.4.14
CPU Voltage Mode [Offset]
Allows you to set the CPU Vcore over voltage. Different sub-items appear according to the
VCore Over Voltage item setting. Configuration options: [Offset] [Manual]
Offset Voltage [Auto]
This item appears only when you set the CPU Voltage Mode item to [Offset] and allows
you to set the Offset voltage. The values range from 0.00625V to 0.50000V with a 0.00625V
interval.
Fixed Voltage [Auto]
This item appears only when you set the CPU Voltage Mode item to [Manual] and allows
you to set a fixed CPU voltage. The values range from 0.85V to 1.60V with a 0.00625V
interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
VCore voltage may damage the CPU permanently, and setting a low VCore voltage may
make the system unstable.