Asus P8Z77-V LE PLUS - Manual (Page 87)

ASUS P8Z77-V LE PLUS 3-21
Chapter 3
Hot Plug [Disabled]
These items appear only when you set the SATA mode item to [AHCI] or [RAID], and allow
you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]
3.5.4 System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to select a primary display from iGPU, PCIE, or PCI graphic devices, or
select SG for switchable GFX. Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M]
[128M] ~ [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and
discrete graphics. The iGPU shared memory size will be fixed at 64MB. Configuration
options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIE x16_1 [Auto]
Allows you to set the PCIE x16_1 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIE x16_2 [Auto]
Allows you to set the PCIE x16_2 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
Main Ai Tweaker Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Configuration >
UEFI BIOS Utility - Advanced Mode
System Agent Configuration
Memory Remap Feature Enabled
> Graphics Configuration
> NB PCIe Configuration