Asus P8Z77-V LE PLUS - Manual (Page 78)

3-12 Chapter 3: BIOS setup
Chapter 3
CPU Current Capability [100%]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
CPU Power Thermal Control [125]
A higher temperature brings a wider CPU power thermal range and extends the overclocking
tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to adjust the value. The
values range from 125 to 135.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Response Control [Auto]
The DIG+ VRM controller provides a faster, and precise power response rate for the CPU.
Apply a higher value for an extreme overclocking. Configuration options: [Auto] [Regular:
100%] [Medium: 150%] [Fast: 200%] [Ultra Fast: 250%]
The actual performance boost may vary depending on your CPU configuration.
iGPU Load-line Calibration [Auto]
Allows you to set the iGPU Load-line Calibration. Configuration options: [Auto] [Regular]
[High] [Extreme]
iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability. Configuration options: [100%] [110%] [120%]
[130%]
Do not remove the thermal module while changing the DIGI+ VRM related parrameters .
The thermal conditions should be monitored.
DRAM Current Capability [100%]
Allows you to set the DRAM Current Capability. Configuration options: [100%] [110%] [120%]
[130%]
DRAM Voltage Frequency [Auto]
Allows you to set the DRAM Voltage Frequency automatically or manually. Configuration
options: [Auto] [Manual]
DRAM Fixed Frequency Mode [XXX]
This item appears only when you set the DRAM Voltage Frequency item to [Manual] and
allows you to set a fixed DRAM frequency. Use the <+> and <-> keys to adjust the value. The
values range from 300k Hz to 500k Hz with a 50k Hz interval.