Asus K8V SE Deluxe - Manual (Page 136)

5-30 Chapter 5: Software support
4. Select Select Disk Drives, then press . Use arrow keys to
select disk drive/s, then press to mark selected drive. (An
asterisk is placed before a selected drive.)
5. Select Start Create Process and press to setup hard disk for
RAID system. The following confirmation message appears:
Press to confirm or to return to the configuration options.
The data on the selected disks will
be destroyed. Continue? Press Y/N
5.7.4 Delete Array
1. In the VIA RAID BIOS utility main menu, select Delete Array then
press . The focus is directed to the list of channel used for IDE
RAID arrays.
2. Press to select a RAID array to delete. The following
confirmation message appears.
Press to confirm or to return to the configuration options.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
6. Select Start Create Process and press to setup hard disk for
RAID system. The following confirmation message appears:
7. Press to confirm or to return to the configuration options.
The data on the selected disks will
be destroyed. Continue? Press Y/N
The same confirmation message appears when you select the Auto
Setup for Data Security option.
The same confirmation message appears when you select the Auto
Setup for Capacity option.