Asus Crosshair V Formula-Z - Manual (Page 91)

ASUS CROSSHAIR V FORMULA-Z 3-11
Chapter 3
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%]
[80 ohms +/- 20%] [60 ohms +/- 20%]
address/command setup time [Auto]
Configuration options: [Auto] [1/2 MEMCLK DELAY(1 1/2 MEMCLK DELAY for 2T
timing)] [1 MEMCLK DELAY(2 MEMCLK DELAY for 2T timing)]
address/command fine delay [Auto]
Configuration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CS/ODT setup time [Auto]
Configuration options: [Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CS/ODT fine delay [Auto]
Configuration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CKE setup time [Auto]
Configuration options: [Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CKE fine delay [Auto]
Configuration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
GPU.DIMM Post
The sub-items in this menu display the status of the installed VGA cards and memory. The
fields show N/A if there are no devices installed on the slots.
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is defined by AMD VRM spec and affects CPU voltage. The CPU working voltage
will decrease proportionally to CPU loading. Higher load-line calibration would get higher
voltage and better overclocking performance, but increase the CPU and VRM thermal. This
item allows you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and 100%
(Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specifiation.