Asus Crosshair V Formula-Z - Manual (Page 87)

ASUS CROSSHAIR V FORMULA-Z 3-7
Chapter 3
Load Extreme OC Profile
Press and select Yes to load the Extreme OC profile to suit extreme overclocking.
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[D.O.C.P.] CPU Bus, CPU ratio and memory parameters will be auto optimized.
The following item appears only when you set the Ai Overclocking Tuner to [Manual].
CPU Bus Frequency [Auto]
Allows you to set the CPU and VGA frequency. Use the <+> and <-> keys to adjust the
PCIE frequency. You can also key in the desired value using the numeric keypad. The
values range from 100 to 600.
PCIE Frequency [Auto]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the
PCIE frequency. You can also key in the desired value using the numeric keypad. The
values range from 100 to 150.
CPU Level Up [CANCEL]
Allows you to select a CPU level, and the related parameters will be automatically adjusted
according to the selected CPU level.
Configuration options: [CANCEL] [CPU LEVEL UP 1] [CPU LEVEL UP 2]
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys to
adjust the value. The valid value ranges vary according to your CPU model.
AMD Turbo CORE technology [Auto]
Allows you to enable or disable the AMD Turbo CORE technology.
Configuration options: [Auto] [Enabled] [Disabled]
Turbo CORE Ratio [Auto]
This item appears only when you set AMD Turbo CORE technology to [Enabled]. This
allows you to increase or decrease the target turbo core speed. Use the <+> and <->
keys to adjust the ratio. The speeds range from 800MHz to 7000MHz with a 100MHz
interval.
Memory Frequency [Auto]
Allows you to set the memory operating frequency.
Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.