3 intel intel intel intel intel, Raid configurations, Setting the bios raid items – Asus P5GD2 Deluxe User Manual
Page 139: Entering the intel, Application accelerator raid option
A S U S P 5 G D 2 D e l u x e
A S U S P 5 G D 2 D e l u x e
A S U S P 5 G D 2 D e l u x e
A S U S P 5 G D 2 D e l u x e
A S U S P 5 G D 2 D e l u x e
5 - 2 7
5 - 2 7
5 - 2 7
5 - 2 7
5 - 2 7
5.4.3
5.4.3
5.4.3
5.4.3
5.4.3
Intel
Intel
Intel
Intel
Intel
®
®
®
®
®
RAID configurations
RAID configurations
RAID configurations
RAID configurations
RAID configurations
This motherboard supports RAID 0 and RAID 1 configurations for Serial ATA
hard disks drives through the Intel
®
ICH6R chipset. Use the Intel
®
Application Accelerator RAID Option ROM utility to configure a disk array.
Setting the BIOS RAID items
Setting the BIOS RAID items
Setting the BIOS RAID items
Setting the BIOS RAID items
Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID configuration.
To set the BIOS RAID items:
1.
Boot the system and press during the Power-On Self-Test
(POST) to enter the BIOS Setup Utility.
2.
From the M a i n > I D E C o n f i g u r a t i o n
M a i n > I D E C o n f i g u r a t i o n
M a i n > I D E C o n f i g u r a t i o n
M a i n > I D E C o n f i g u r a t i o n
M a i n > I D E C o n f i g u r a t i o n menu in the BIOS, the
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s item as RAID.
3.
Set the O n B o a r d S e r i a l - A T A B O O T R O M
O n B o a r d S e r i a l - A T A B O O T R O M
O n B o a r d S e r i a l - A T A B O O T R O M
O n B o a r d S e r i a l - A T A B O O T R O M
O n B o a r d S e r i a l - A T A B O O T R O M item as Enabled.
4.
Save your changes and exit Setup.
Entering the Intel
Entering the Intel
Entering the Intel
Entering the Intel
Entering the Intel
®
®
®
®
®
Application Accelerator RAID Option
Application Accelerator RAID Option
Application Accelerator RAID Option
Application Accelerator RAID Option
Application Accelerator RAID Option
ROM utility
ROM utility
ROM utility
ROM utility
ROM utility
To enter the Intel
®
Application Accelerator RAID option ROM utility:
1.
Boot up your computer.
2.
During POST, press
[
DISK/VOLUME INFORMATION
]
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
Serial #
Size
Type/Status (Vol ID)
0 ST380013AS
xxxxxxxx
74.5GB
Non-RAID Disk
1 ST380013AS
xxxxxxxx
74.5GB
Non-RAID Disk
Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.
[
MAIN MENU
]
1.
Create RAID Volume
2.
Delete RAID Volume
3.
Reset Disks to Non-RAID
4.
Exit
[ ]-Select
[ ]-Select
[ESC] Exit
[ESC] Exit
[Enter]-Select Menu
[Enter]-Select Menu
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.